///////////////////////////////////////////////////////////////////////////

    - StarPRNT Intelligence for Kiosk(SK Series) V1.2.0 -
        Readme File                                       09/07/2023

   (C) 2019 - 2023 Star Micronics Co., Ltd. All rights reserved.
///////////////////////////////////////////////////////////////////////////

*This ReadMe File applies to StarPRNT Intelligence for Kiosk(SK Series) V1.2.0.

  Thank you very much for purchasing Star Printer.

  Contents:

    1.  Supported Models
    2.  Functions and Models
    3.  How to Install, How to Uninstall
    4.  Silent Installation
    5.  Silent Un-Installation
    6.  Restrictions
    7.  Software Evaluation Environment
    8.  Release Notes


    ====================
    1.  Supported Models
    ====================
     This Software supports the following Star Micronics Printer models:

     - SK1-211/221
     - SK1-211/221 Presenter
     - SK1-311/321
     - SK1-311 Presenter
     - SK1-41
     - SK1-41 Presenter
     - SK5-31 Presenter

    ========================
    2.  Functions and Models
    ========================
     The available features vary depending on models and interfaces.
     Please see installation manual for futher details.


    ====================================
    3.  How to Install, How to Uninstall
    ====================================

    Turn the printer off and close all other applications that are currently
    open before installing the Star Windows Software.

    Please refer to an installation manual for the procedure of 
    installation and uninstallation.

        StarPRNT_Kiosk_SKSeries_v1.2.0_setup\Document\Install Manuals\SK1_Printer_Software_InstallManual_en.pdf


    =======================
    4.  Silent Installation
    =======================
    By running a silent installation, the software can be automatically
    installed without operator action or onscreen feedback. This is
    convenient when performing installation on several PCs. 
    To begin a silent installation, run
    "msiexec.exe /i [file name of msi(with full path)] /qn"

    Execute command prompt as administrator.

    msi file is in "\Setup" folder in the zip file.

    <Windows 10 (32bit) >
     msiexec.exe /i D:\StarPRNT_Kiosk_SKSeries_v1.2.0_setup\Setup\StarPRNT_Kiosk_SKSeries_1.2.0-1.2.0-Release_x86.msi /qn /norestart

    <Windows 10/11 (64bit) >
     msiexec.exe /i D:\StarPRNT_Kiosk_SKSeries_v1.2.0_setup\Setup\StarPRNT_Kiosk_SKSeries_1.2.0-1.2.0-Release_x64.msi /qn /norestart


    ==========================
    5.  Silent Un-Installation
    ==========================
    By running a silent un-installation, the software can be automatically
    uninstall without operator action or onscreen feedback.
    This is convenient when uninstalling this software from several PCs. 

    To run a silent un-installation, run "msiexec.exe" with the following
    command.

    (1)Execute command prompt as administrator.

    (2)Execute the following command to run a silent un-installation.

       msiexec.exe /x {B6CDB394-59B8-4086-8404-0CE87B057DD8} /qn

    (3)If you are using the Star Micronics Cloud Service, execute the following command 
       to delete the registration information (the confirmation screen will not be displayed).

       [SMCSInformationCleanUpTool.exe(*1)(with full path)] /q


    By executing "SilentUninstall.bat(*1)" included in this package as administrator,
    the above (2) and (3) can be executed continuously.


    *1:It is stored in the following folder in this package.

         StarPRNT_Kiosk_SKSeries_v1.2.0_setup\SMCSInformationCleanUpTool


    =============================
    6.  Restrictions and Cautions
    =============================
    Below are the restrictions and cautions for this version.

    <Install, Uninstall>
    Note the following points when uninstalling software.

     - StarMicronics folder
       In some cases the following folders do not delete after the driver is uninstalled:
           [Start Menu] -> [All Programs] -> [StarMicronics]
           32bit Windows:   C:\Program Files\StarMicronics
           64bit Windows:   C:\Program Files (x86)\StarMicronics

       They can be manually deleted. (Right Click > Delete)


     - Installing this software may fail if Windows Update is installing updates 
        on the computer at the same time as Setup is running.
        To remedy this issue, wait for Windows Updates to finish, and then restart  
        the computer. Then, run setup.

     - Install after uninstallation
       Install after uninstallation, delete "old" connection settings, then make new connection.


    <Printer Driver>
    
     - If the Printer Queue Name is changed after a USB Printer is already installed
       using the USB Printer Class Driver, it is necessary to reboot the PC.
        
     - In some applications (e.g. Microsoft Office),  you may not be able to change 
       the paper size from the UI in the applications.
       In this case, please set the paper size from "Printer properties" first.
       Then you can select the paper size from the UI in the applications.

     - If you make the following settings on the [Printer properties]-[Advanced] tab,
       printing may not be performed properly, so do not change to the following settings.

       - Print directly to the printer
       - Uncheck "Enable advanced printing features"

     - When creating a user-defined paper, the left margin may not be set correctly.
       In this case, set the print mode to "Line" on the [Printer Properties] - [Device Settings] tab,
       and the left margin will be set to the correct value.

    <Printer Utility>
     -  When changing Memory Switch Settings, ensure the printer power is on.


    ===================================
    7. Software Evaluation Environment
    ===================================
     This software has been evaluated mainly on the following environments.

    PC environments 
      - Windows
         CPU : Intel Core 2 Duo 2.40GHz
         RAM : 2GB
         HDD : 250GB

    Windows environments 
      - Microsoft Windows 10 Enterprise          (32bit)
      - Microsoft Windows 10 Enterprise          (64bit)
      - Microsoft Windows 11 Enterprise          (64bit)

    ==================
    8. Release Notes
    ==================
    Rev. 1.2.0  Added support SK1-41, SK1-41 Presenter, SK5-31 Presenter.
    09/07/2023  Packaged items
                 - Added a tool to delete registration information of Star Micronics Cloud Service.

    Rev. 1.1.1
    10/28/2022 Software Installer
               - Partially changed the uninstall process.

    Rev. 1.1    Support Bezel / LED Bezel for non-Presenter model (optional).
    10/08/2019
    
    Rev. 1.0    First release.
    06/17/2019
